Sentry US shdvr-08 Instructions d'exploitation télécharger pdf (Page 13)

C2676M-A (8/09) 13

Formatting

The DX4500/DX4600 automatically detects when a new drive is installed or when a current drive is

switched to a different SATA connector. After the DX4500/DX4600 starts, the system prompts you to

format the newly installed drive. Drives that have not been switched to a different SATA connector are not

reformatted.

1. On the front panel or remote control, press and hold the Power button until your hear a beep,

and then release the button. After a few seconds, the DX4500/DX4600 startup screen appears.

2. Wait until the DVR displays the “HDD configuration has been changed” dialog box.

Figure 12. Application Window and GUI Toolbar

3. Click OK to format the newly installed HDDs. The “Hard disk drive recovery in progress” dialog box

appears. To cancel the formatting process, click Cancel.

4. When the “Hard disk drive recovery complete” dialog box appears, click OK. The application window

appears.

WARNING: Before initiating a format procedure, verify that you reinstalled the drives in their

original locations and reconnected their original SATA connectors. For more information, refer to

Before You Begin on page 4 and the DX4500/DX4600 server operation/programming manual.

1 2 ... 8 9 10 11 12 13 14 15 16

Pas de commentaire

Sentry US shdvr-08 Instructions d'exploitation Page 13