Sentry US ACSK-EM Manuel d'utilisateur télécharger pdf (Page 12)

DOOR BELL

To turn on:

1. In Setup Mode, press * key and 2. The mode LED indicator will flash yellow.

2. Press 0 and 2. A long beep will sound and the mode LED indicator will turn yellow

to indicate that door bell was turned on.

3. Press # key to exit Setup Mode.

To turn off:

1. In Setup Mode, press * key and 2. The mode LED indicator will flash yellow.

2. Press 0 and 1. A long beep will sound and the mode LED indicator will turn yellow

to indicate that door bell was turned off.

3. Press # key to exit Setup Mode.

Note: The relay in ZONE 2 for door bell is unavailable if the function of door bell is turned on

but the function or door lock is inactive. Press the * key in standby mode, the relay contacts

one time, the door bell ringing is triggered.

RESTORING FACTORY DEFAULT

1. In Setup Mode, press * key and 8. The mode LED indicator will flash yellow.

2. Press 8 twice. A continuous long beep means all user cards and codes have been

cleared out.

3. Press * key and 8. The mode LED indicator will flash yellow.

4. Press 9 twice. A continuous long beep means factory default is restored.

5. Press # key to exit Setup Mode and standby.

If done improperly, the device will beep and revert back without any actions in 30 seconds.

During the access mode setting, there is a 5-second window to either input password or

swipe card. If no action is taken within 5 seconds, it will revert back.

When ZONE 1 relay is activated, the door LED indicator light will turn green. When ZONE 2

relay is activated, the door LED indicator light will turn red.

If you forget the Programming/Admin Code, press and hold # key, then power on the device.

A beep will sound indicating the default Programming/Admin Code setting is successful.

2-digit Length – default code is 12

3-digit Length – default code is 123

4-digit Length – default code is 1234

5-digit Length – default code is 12345

6-digit Length – default code is 123456 (max.)

1 2 ... 7 8 9 10 11 12 13 14

Pas de commentaire

Sentry US ACSK-EM Manuel d'utilisateur Page 12