Sentry US ACSK-EM Manuel d'utilisateur télécharger pdf (Page 7)

SYSTEM WIRING CONNECTIONS

Connecting to Power:

Connect the Red to power positive (+).

Connect the Black to power negative (-).

Connecting to Locks (two options):

Option1: Using a Strike Lock

Connect the White to power positive (+).

Connect the Pink to the Strike lock power positive (+) or the normally open (NO).

Connect the Strike lock power negative (-) to the power negative (-).

Option 2: Using a Magnetic Lock

Connect the Aqua to power positive (+).

Connect the Pink to the Magnetic lock power positive (+) or the normally close (NC).

Connect the Magnetic lock power negative (-) to the power negative (-).

Connecting an Unlocking Button to Open the Door from the Inside:

Connect the Orange to the button NO for Strike lock or NC for Magnetic lock.

Connect the button negative (-) or common to power negative (-).

Connecting to Button 2:

Connect the Yellow to the button NO for Strike lock or NC for Magnetic lock.

Connect the button negative (-) to power (-).

Connecting the Door Status Detection:

Connect the Brown to the sensor positive (+).

Connect the sensor negative (-) to power negative (-).

*The Door Status Detection (DSD) will automatically lock the door once a connection is

detected. When a person comes in, it will not wait for the delay time to lock the door but

locks it automatically when connection is detected. This is a good way to prevent someone

coming in from behind a person who has access.

PROGRAMMING & OPERATION

*All programming need to go to Setup Mode first.

Two-zone relays can be programmed for opening the lock. Up to 1000 user cards and

correlative codes can be stored into ZONE 1 and up to 10 user cards or codes can be stored

into ZONE 2. In addition the ZONE 1 can be programmed for 3 modes to open the lock: only

the card access, both the code and card access, or combined access. The ZONE 2 could be

programmed for door bell.

Two-zone relays can be programmed for opening the lock. Up to 1000 user cards and

correlative codes can be stored into ZONE 1 and up to 10 user cards or codes can be stored

into ZONE 2. In addition the ZONE 1 can be programmed for 3 modes to open the lock: only

the card access, both the code and card access, or combined access. The ZONE 2 could be

programmed for door bell.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Pas de commentaire

Sentry US ACSK-EM Manuel d'utilisateur Page 7